Qianli iBridge A3 – Lightning Type-C Charging Connector Tester

The Qianli iBridge A3 answers in a few seconds the question that wastes the most time in smartphone repair: is the charging connector dead, or is it something else? Plug it in, read it, know it. No more blind flex cable replacements.

Features

• Dual interface: built-in Lightning connector and Type-C connector
• Pin-by-pin analysis of the 24-pin Type-C port: GND, VBUS, D+, D-, CC1, CC2, SBU1, SBU2, RX1, RX2, TX1, TX2
• Control screen with green or red indicator per pin — the fault is readable at a glance
• Instant detection of bad contacts, broken pins, and short circuits
• Automatic detection upon connection, with automatic interface rotation
• No external power supply required
• Metal and ABS housing
• Pocket size: 8.5 × 2.5 × 1.5 cm for 35 g

Compatibility

Lightning: iPhone 5 to 14 series.

Type-C: Samsung, Huawei, Xiaomi, Oppo, OnePlus and most recent smartphones and tablets.

Highlights

• It decides between the connector and the motherboard — it's the diagnosis that avoids ordering an unnecessary part
• The pin-by-pin detail shows exactly which one is dead: a dead data pin does not have the same consequences as a cut VBUS
• Also useful before buying second-hand, to check that a phone charges and transfers correctly
• Passive and autonomous: nothing to recharge, nothing to plug into the mains
• Fits in the pocket of the workshop coat

Applications

Charging failure diagnosis, slow or intermittent charging, data transfer check, port verification before or after replacement, receiving phones in the workshop.

Contents

• 1 Qianli iBridge A3 tester
• 1 manual

Note

The power tester visible on some of the manufacturer's visuals is a separate device: it is not included.