Carbon brushes Bosch GWS 6-100 600 660 8-125 580 850 – 5x8x15 1607014144

Is your angle grinder losing power, crackling, producing unusual sparks from under the cover, or refusing to start? In the vast majority of cases, the motor brushes are worn. These 5 x 8 x 15 mm carbon brushes are sold in pairs, exactly as they are replaced, and can get an angle grinder back in service for just a few euros instead of buying a new one.

Compatible Models

5 x 8 x 15 mm size, copper braid and flat female terminal. Equivalent to the Bosch carbon brush set 1 607 014 144 / 1 607 014 145, reference 810 on the official GWS 6-100 (0 601 375 038) exploded view.

• Bosch GWS 6-100 (and GWS 6-115 variants)
• Bosch GWS 600, GWS 660
• Bosch GWS 8-125 C
• Bosch GWS 580, GWS 850 C, GWS 7-115, GWS 9-150 CS
• Bosch-type grinder motors 20 / 24 / 26 / 85
• Dongcheng S1M-FF03-100A and generic grinders with the same size

Be careful with similar sizes. Several Bosch grinders use 5 x 8 x 16 mm, one millimeter longer: this is not the one. Before ordering, take out an original brush and check three points: the 5 x 8 mm cross-section, the 15 mm length, and the flat female terminal (if your brush has an integrated spring or a round washer, it is not the right one).

Choose Your Quantity

• 1 pair – 2 brushes: enough to repair one grinder
• 2 pairs – 4 brushes: discounted price
• 3 pairs – 6 brushes: discounted price
• 4 pairs – 8 brushes: discounted price
• 5 pairs – 10 brushes: best price per pair

The more pairs you buy, the lower the price per pair. Ideal if you maintain several machines or want to have spares on hand for the next time they wear out.

Specifications

• Dimensions: 5 x 8 x 15 mm
• Connection: flexible copper braid + flat female terminal
• Material: compressed graphite, copper braid, brass terminal
• Equivalents: Bosch 1 607 014 144 and 1 607 014 145
• Without spring: the push spring remains that of your brush holder
• Packaging: per pair (2 brushes), from 1 to 5 pairs

Key Features

• Bosch GWS size, one of the most common on 115 and 125 mm angle grinders
• Sold in pairs: exactly what you need for a repair
• Restores motor power, consistency, and strong starting
• Braid and terminal already crimped, ready to install
• Economical repair: a few minutes of disassembly instead of replacing the machine

Applications

115 and 125 mm angle grinders, mainly Bosch GWS series, as well as generic and Dongcheng machines using the same brush holder.

Contents

Depending on the quantity chosen: 2, 4, 6, 8 or 10 5x8x15 mm carbon brushes with braid and terminal.

Maintenance

Check the brushes every 50 to 100 hours of use. A brush worn to less than a third of its original length must be replaced. Take the opportunity during disassembly to blow out the commutator with dry air and remove graphite residue, which is very abundant on a grinder.

Precautions

Always disconnect the machine before any work. Always replace both brushes together, never just one: brushes with different wear levels cause imbalance and premature commutator wear. This is why they are sold in pairs.

Please Note

Non-official adaptable part, supplied without retail packaging, packed in a protective bag. The brands and references mentioned are for compatibility reference only. Any doubts? Contact us with the dimensions of your original brush before ordering.