JCD Cordless Soldering Iron 1000 mAh USB-C – 260 to 420°C, LED Display

Soldering without a power outlet is a game-changer: on a ladder, behind a wall-mounted TV, in a vehicle, or on the go, this cordless JCD soldering iron heats up in seconds using its own battery. It charges via USB-C like a phone, displays its temperature on an LED screen, and turns itself off if you forget about it.

Two configurations, two colors

• 1 tip — the iron, its mounted tip, the stand with sponge, the USB-C cable, the flux, the solder spool, and the hard case.
• 3 tips — the same set, with two additional tips: chisel and flat, in addition to the fine point.

Available in orange or gray. The iron is identical in all four cases.

Specifications

• Brand: JCD
• Power supply: built-in 1000 mAh, 3.7 V battery
• Charging: USB Type-C — red indicator while charging, green when fully charged
• Temperatures: 5 levels — 260, 300, 340, 380, and 420 °C
• Display: digital LED screen, °C / °F toggle
• Heating: ceramic PTC element
• Standby: automatic shut-off after inactivity
• Built-in soldering area light
• Tips: plug-and-play design, interchangeable by hand
• Supplied in a hard case

Key features

• No mains cable: the only practical solution for soldering behind a wall-mounted TV or inside an electrical panel
• USB-C charging: the same cable as your phone, and a power bank is all you need to get back to work
• Displayed temperature, not guesswork: 260 °C for delicate electronics, 420 °C for large components and thick wires
• Automatic shut-off: no more dangerously hot tips left at the bottom of your bag
• Built-in light: the soldering area remains visible inside a cabinet or under a worktop
• Hard case: everything stays together and nothing gets lost

Applications

On-site repairs, connector and wire soldering, circuit board repair, model making, automotive DIY, and work at height or without a nearby power outlet.

Contents

• 1 JCD cordless soldering iron with LED screen
• 1 or 3 tips depending on the version chosen — fine point, chisel, flat
• 1 stand with cleaning sponge
• 1 USB Type-C charging cable
• 1 solid rosin flux
• 1 spool of solder wire
• 1 hard storage case

Maintenance

Wipe the tip on the damp sponge before each use and tin it before turning the iron off. Charge the battery before storing it for an extended period: a lithium battery left empty for several months will deteriorate.

Precautions

The tip heats up to 420 °C: never place it down outside its stand, and never touch the metal part. Only put the device in its case once it has completely cooled. Work in a well-ventilated area, as flux fumes are irritating.

Please note

A 1000 mAh cordless iron is designed for occasional use — a few dozen solders per charge. For continuous use at a workbench, a mains-powered iron remains more suitable. The two complement rather than compete with each other.